http://www.awfraser.co.nz/aw-fraser-blog.html?task=feed&type=rss AW Fraser Blog 2011-09-17 02:58:55 English (United Kingdom) hourly 1 /aw-fraser-blog/2011/09/17/14-vertical-brass-extrusion-press-great-for-hollow-brass-rod.html /aw-fraser-blog/2011/09/17/14-vertical-brass-extrusion-press-great-for-hollow-brass-rod.html#comment Matt Toohey The Extrusion Press at AW Fraser is an indirect vertical press with a maximum billet weight of 37 kg. It was manufactured by Fie Sat, 17 Sep 2011 02:58:55 +1200 /aw-fraser-blog/2011/09/17/14-vertical-brass-extrusion-press-great-for-hollow-brass-rod.html http://www.awfraser.co.nz/aw-fraser-blog.html?task=feed&type=rss2&id=14 /aw-fraser-blog/2011/07/21/13-bronze-web-based-ordering.html /aw-fraser-blog/2011/07/21/13-bronze-web-based-ordering.html#comment Matt Toohey We are planning to introduce a web-based ordering system in the coming months. The reason for this is that we want to be accessible to our clients in their time zone and to further automate our service and thereby reduce any opportunity Thu, 21 Jul 2011 08:09:14 +1200 /aw-fraser-blog/2011/07/21/13-bronze-web-based-ordering.html http://www.awfraser.co.nz/aw-fraser-blog.html?task=feed&type=rss2&id=13 /aw-fraser-blog/2011/06/02/12-bronzealloymaterialsubstitution.html /aw-fraser-blog/2011/06/02/12-bronzealloymaterialsubstitution.html#comment Matt Toohey One of the key engineering challenges we face in modern manufacturing is choosing the right materials for our products to ensure maximum pro Thu, 02 Jun 2011 10:34:52 +1200 /aw-fraser-blog/2011/06/02/12-bronzealloymaterialsubstitution.html http://www.awfraser.co.nz/aw-fraser-blog.html?task=feed&type=rss2&id=12 /aw-fraser-blog/2010/09/29/11-bronze-tolerances-and-machining-allowance.html /aw-fraser-blog/2010/09/29/11-bronze-tolerances-and-machining-allowance.html#comment Matt Toohey Bronze foundries around the world use different tolerance  machining allowances to enable their customers to plan to use Wed, 29 Sep 2010 08:22:17 +1300 /aw-fraser-blog/2010/09/29/11-bronze-tolerances-and-machining-allowance.html http://www.awfraser.co.nz/aw-fraser-blog.html?task=feed&type=rss2&id=11 /aw-fraser-blog/2010/07/26/10-busy-times-at-aw-fraser.html /aw-fraser-blog/2010/07/26/10-busy-times-at-aw-fraser.html#comment Matt Toohey Since I last wrote a blog, we have been experiencing the full weight of the global recovery and we are now scrambling to increase capacity while keeping costs under control and utilizing the base efficiencies we created when we were quie Mon, 26 Jul 2010 09:19:45 +1200 /aw-fraser-blog/2010/07/26/10-busy-times-at-aw-fraser.html http://www.awfraser.co.nz/aw-fraser-blog.html?task=feed&type=rss2&id=10