Excellent wear resistance, good impact resistance and reasonable corrosion resistance. Suitable for high strength bearings.
Full alloy description:
A.W. Fraser Alloy 954 is a high strength aluminium bronze conforming to the requirements of ASTM B505 for Continuous Cast and ASTM B271 for Centrifugal Cast alloy 95400.
Alloy 954 is very hard and abrasion resistant, having excellent strength and wear resistance with reasonable machining properties.
These physical properties remain good at elevated temperatures. General corrosion resistance is good but under some circumstances may suffer dealuminification.
Alloy 954 is suitable for high strength bearings, and has good impact resistance, but poor anti-seizure properties requiring reliable full film lubrication to prevent metal to metal contact and possible scoring.
The composition of A.W. Fraser alloy 954 is strictly controlled as are the casting conditions.
Alloy 954 products are manufactured using the latest continuous and centrifugal casting technology.
Machinability Rating: 50
SAE Grade: 9C
AS1565 95400; ASTM B505, B271 - C95400; SAE J46 1, J462; DIN 1714 - G-CuAl11Fe4; UNI 5274 – CuAl11Fe4;
Download tech sheet:
For a full alloy summary, including Chemical Composition and Mechanical Properties, please download our tech sheet in PDF format below...
Search for an alloy by keyword...
The alloy information provided on this page is indicative and must not be taken as a substitute for the full specification from which it is drawn. In particular, the mechanical property requirements vary widely with product specification.
The information contained on this page is based on our present knowledge and is given in good faith as a precursor to discussing your specific requirements with us.
No liability will be accepted by AW Fraser in respect of any action taken by any third party in relying on the data on this page.